| Rated working voltage | AC380V | Electrical lifespan | 5000 times |
| Rated working current | 200A | Mechanical lifespan | 50000 times |
| Rated insulation voltage | 500V | Action lever action force | 50N |
| Maximum number of control circuits | 3 | Angle of contact breaking action rod | 45° |
JK16 – 200 Limit Switch
Product Introduction
The JK16 – 200 AC limit switch is mainly used in the power supply circuit of construction hoists with an alternating current of 50Hz, a rated working voltage of up to 380V, and a rated working current of up to 200A. When the limit switch of the hoist fails, this switch is used to cut off the main power supply of the hoist, thus achieving the terminal limit protection of the construction hoist.
The shell components of this product are formed by sheet metal stamping. The product is aesthetically pleasing and sturdy, with good mechanical strength. The combination of its internal contacts and cams is accurate, fully meeting the requirements for the terminal limit protection of construction hoists.
Dimensions
- Overall dimensions (mm): 240×232×183
- Installation dimensions (mm): 150×168×48×4 – M8
Get a quote
If you have any comments or suggestions, please contact us and we will provide you with the best quality service
Please leave your contact information, we will contact you as soon as possible